TRIPLE CLAMPS

MODEL 4 evo

Set of anodized triple clamps for modern superbikes, CNC-machined from billet of 7075 ERGAL aluminium. Developed from recent studies about the structural dynamics of current motorcycles, these triple clamps provide an excellent opportunity to upgrade the bike’s chassis.

The lower clamp features inverse ribs technology providing greater rigidity while maintaining low weight. The upper clamp features longitudinal slots creating grater flexibility while decreasing weight. The combination of a rigid lower triple clamp and a top triple clamp featuring engineered-flexibility effectively reduce chattering, following the technological trends of MotoGP and World SuperBike. Additionally, the triple clamp set features an adjustable eccentric at the steering stem, allowing for offset variations to suit a rider’s preferences. The MOD.4 evo kit is proposed in two different setups: Base Setup (fixed offset); Racing Setup (adjustable offset ). Besides, there's the chance, for some models, to apply the OEM ignition pawl to the upper clamp.

 

Suitable for: Yamaha R1 - R6, Suzuki GSXr, Honda CBR1000, Bmw 1000 RR

                       Ducati 916, 996, 998, 1098, 748, 848, Ducati Sport 1000

                       Aprilia RSV4, Kawasaki ZX10R etc.

Material: ERGAL 7075

Colors: Aluminium, Titanium, Black

Recommended torque for fork's bolts:  7,5Nm with greasing

Sequence:  Upper 1,2,1,2,1 Lower 1,2,3,4,1,2,3,4,1,2,3

Forks diameters:  until 58mm

Fork spacing:  205, 210 and 215

Offset: adjustable 25 to 31

Chance to apply the OEM ignition pawl (trough purchasable brakets, steering lock function NOT available)

Accessories: Tapered roller bearing and dust seal

                       ON/OFF Led Switch with coloured bracket

                       Brackets set for OEM ignition pawl

MODEL 6 Panigale

MODEL 2 evo

Last frontier for Ducati Monster. Excellent design for  these triple clamps completely in ERGAL 7075, dedicated to the Monster 2002-present (including 696, 796, 1100).

The model is based on the experience gained in the racing sector and incorporates anti-chattering technology.

Being adaptable for various models, it can take configurations consistent to quick installation, with a perfect adaptation to all the stock component parts of the bikes .

The triple set is available  for both versions:  handlebar and clip ons.

 

Suitable for: DUCATI Monster from 2002 on, DUCATI Classic

Material: ERGAL 7075

Colors: Aluminium, Gold, Black

Recommended torque for fork's bolts:  7,5Nm with greasing

Sequence: Upper 1,2,1,2,1    Lower 1,2,3,4,1,2,3,4,1,2,3

Forks diameters:  untill 53 mm upper - 56 mm lower

Forks spacing:  205 mm

Offset:  fixed 30 mm

 

Accessories:  Riser Handlebar Supports : Not Available

                        Tapered roller bearing 35mm

                        Dust seal: 35mm

Through the experience grown in SBK with the front ends of MOD.4, we created our line dedicated to Ducati 1199 Panigale. This top range deserves a front end in ERGAL, from billet, with adjustable offset. Plug&Play application, great care for aesthetic details and  trendy colors, make of this new product our biggest bet for next future.

 

Suitable for: Ducati 1199 and 899 Panigale

Material: ERGAL 7075

Colors: Aluminium, Titanium, Black

Recommended torque for fork's bolts:  7,5 Nm  with greasing

Sequence:   Upper 1,2,1,2,1     Lower  1,2,3,4,1,2,3,4,1,2,3

Forks diameters:  57 mm upper - 58 mm lower

Forks spacing:  to 225,5 mm

Offset:  adjustable to 25 - 31 mm

 

Accessories:  Tapered roller bearing 35mm

                        Dust seal: 35mm

                        ON/OFF Led Switch with coloured bracket

 

 

 

MODEL 7 MV Agusta

The  new challenge for 2014 sees us as protagonists with a new  avantreno dedicated to another great motorcycle:  Mv Agusta F4.

This new front-end has all the qualities of its predecessors: from billet, in Ergal, with offset adjustment, a big attention to details, in vogue colours, total  versatility that can host a lot of accessories.

 

Suitable for: MV Agusta F4

Material: ERGAL 7075

Colors:  Aluminium, Titanium, Black

Recommended torque for fork's bolts:  7,5 Nm  with greasing

Sequence:   Upper 1,2,1,2,1     Lower  1,2,3,4,1,2,3,4,1,2,3

Forks diameters:  58 mm upper - 58 mm lower

Forks spacing:  210 mm

Offset:  adjustable to 25 - 31 mm

 

Accessories:  Tapered roller bearing 35mm

                        Dust seal 35mm

                        ON/OFF Led Switch with coloured bracket

 

 

 

MODEL 8

The IMA Special Parts expands its range of products with this latest creation dedicated to the Kawasaki ZX10R and, from now on, to the Yamaha R1 2015. The passion and attention to details of the previous years have remained the same. In fact our experience let us get also this newcomer from billet , in ERGAL. Made with minutiae, it still reflects our continuing trend to innovation.

 

Suitable for: Kawasaki ZX10R, Yamaha R1 2015

Material: RGAL 7075

Colors: Aluminium, Titanium, Black

Recommended torque for fork's bolts:  7,5 Nm  with greasing

Sequence:   Upper 1,2,1,2,1     Lower  1,2,3,4,1,2,3,4,1,2,3

Forks diameters:  50 mm upper - 55 mm lower

Forks spacing:  210 mm

Offset:  adjustable to 25 - 31 mm

 

Accessories:  Tapered roller bearing 35mm

                        Dust seal 35mm

                        ON/OFF Led Switch with coloured bracket

 

 

 

MODEL 9 2016+ ZX10R - News 2017

The Ninja tradition goes on with the latest Model 2016 for ZX10R and IMA couldn’t miss the chance to dedicate it this new project. Recalling the fundamental and successful elements of Model 8, now Model 9 is born, to give to Kawasaki riders new emotions. Among the news dedicated to this model, there's the equipment to apply the OEM ignition pawl to the upper clamp.

 

Suitable for: Kawasaki 2016+ ZX10R

Material: ERGAL 7075

Colors: Aluminium, Titanium, Black

Recommended torque for fork's bolts:  7,5 Nm  with greasing

Sequence:   Upper 1,2,1,2,1     Lower  1,2,3,4,1,2,3,4,1,2,3

Forks diameters:  50 mm upper - 55 mm lower

Forks spacing:  220 mm

Offset:  adjustable to 25 - 31 mm

Chance to apply the OEM ignition pawl (trough purchasable brakets, steering lock function NOT available)

Accessories:  Lower tapered roller bearing  and dust seal: 35mm

                        ON/OFF Led Switch with coloured bracket

                        Brackets set for OEM ignition pawl

Beware of imitations! For any purchasing please contact us or our authorized dealers

Racing-derived product, the company disclaims any responsibility 'on the possible use different from racing on circuit.

TRIPLE CLAMPS

WATCH THE VIDEO

TRIPLE CLAMPS